How to Foil Glass Nuggets and Other Embellishments to Add Dimension to Stained Glass Projects

Adding dimension to a marked glass project adds interest and depth. To create dimension you can add glass nuggets, jewels, sea shells, recycled glass and other items. roller burnishing tool

Think about to add dimensional items in a project, choose or draw a design you wish to create. Lay out your routine beginning with the dimensional objects. These objects will need to be foiled and then tack soldered, if used in groups or combination, then encircling glass is added.

When ever choosing foil to cover dimensional objects, you require to first decide if you will use patina on your finished project. Intended for transparent objects, you will want to choose a copper foil that will blend in with your finished project. If you are going to use black patina on your finished project, use a black backed copper foil. For projects that will remain silver, use a silver backed foil. In the event that a copper patina to be used, then use copper backed foil. Pertaining to objects which are not transparent, the backing of the copper foil are not an issue.

The next consideration works with the thickness of the copper foil. For really small glass nuggets, jewels or thin reused glass, use 5/32″. Foil comes in 5/32″ to 1/2″. For most things, 7/32″ copper foil works well.

The last factor to consider is the thickness of the real estate agent foil. Copper foil comes in thicknesses of just one. 0 mil. to 1. 5 mil. The moment foiling dimensional objects use 1. 0 mil. This kind of foil easily bends and conforms to the dimensional object without creating excessive bulk due to creasing and bending of foil.

A tip for hindrance nuggets and jewels is to wrap the foil around the edge of the nugget or treasure, then press down with your fingers. Instead of trying to burnish, simply place your nuggets and jewels in a cheap container and shake. The movement of the nuggets/jewels against the other person will do all the burnishing for you.

To foil other dimensional objects, wrap foil along the edge of the object where it will be mounted on the stained glass piece. In that case by using a burnishing tool, press the foil firmly to the object on the top edge and both sides.

Once your target or objects are foiled and burnished, lay them on your pattern. In case you are by using a group of dimensional objects such as a glass nuggets, tack solder them together. Then cut the pattern pieces for the surrounding glass pieces. This kind of will give you a more precise fitting.

Leave a Reply

Your email address will not be published. Required fields are marked *